Máy Chủ Server SuperServer Intel® Xeon® processor E5-2600

MÁY CHỦ SERVER SUPERSERVER GPU 1017GR-TF E5-2600

Key Features
1. Single socket R (LGA 2011) supports Intel® Xeon® processor E5-2600
2. Up to 256GB DDR3 1600MHz reg ECC DIMM
3. 2 (x16) PCI-E 3.0 slots (GPU/MIC opt.)
1 (x8) PCI-E 3.0 low-profile slot
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Intel® i350 Dual-Port GbE Controller
6. 6x Hot-swap 2.5" SATA Drive Bays
7. 1400W High-efficiency Power Supply 80Plus Platinum Level (94%+) Digital Switching Control & PMBus 1.2
8. 8x Counter rotating fans w/ optimal fan speed control
9. Smart server management tools

Integrated Board X9SRG-F

Product SKUs
SYS-1017GR-TF	* SuperServer 1017GR-TF (Black)
Motherboard
Super X9SRG-F
Processor/Cache
CPU	* Intel® Xeon® processor E5-2600 family (up to 8 cores and up to 130W) * Single Socket R (LGA 2011)
Cache	* Up to 20MB
System Bus	* QPI up to 8 GT/s
GPU/MIC Support	* M2075/M2090, up to 130W CPU at 35°C * K10 (Kepler), up to 130W CPU at 35°C * K10 (Kepler), up to 135W CPU at 30°C
System Memory
Memory Capacity	* 8x 240-pin DDR3 DIMM sockets * Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
Memory Type	* 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	* 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	* 1.5 V, 1.35 V
Error Detection	* Corrects single-bit errors * Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset	* Intel® C602 Chipset
SATA	* Intel ICH10R SATA 3.0Gbps Controller * RAID 0, 1, 5, 10 support
IPMI	* Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Nuvoton WPCM450 BMC
Network Controllers	* Intel® i350 Dual Port Gigabit Ethernet * Virtual Machine Device Queues reduce I/O overhead * Supports 10GBASE-T, 100GBASE-TX, and 1000BASE-T, RJ45 output
Graphics	* Matrox G200eW
Super I/O	Nuvoton W83527
Input / Output
SATA	* 2 SATA 3.0 ports (6Gbps) * 4 SATA 2.0 ports (3Gbps)
LAN	* 2 RJ45 Gigabit Ethernet LAN ports * 1 RJ45 Dedicated IPMI LAN port
USB	* 6 USB 2.0 ports total (2 rear + 4 via headers)
Video	* 1 VGA Connector
Keyboard/Mouse	* 1 PS/2 Keyboard/Mouse port
Serial Port	* 1 Serial header
DOM	* 1 DOM (Disk on Module) power connector
System BIOS
BIOS Type	* 64Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	* Plug and Play (PnP) * APM 1.2 * DMI 2.3 * PCI 2.2 * ACPI 1.0 / 2.0 * USB Keyboard support * Hardware BIOS Virus protection * SMBIOS 2.3 * UEFI * RTC (Real Time Clock) Wakeup
Chassis
Form Factor	1U Rackmount
Model	CSE-118GTQ-1K43B
Dimensions
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	28.5" (724mm)
Gross Weight	41.4 lbs (18.8 kg)
Available Color	Black
Front Panel
Buttons	* Power On/Off button * System Reset button
LEDs	* Power LED * Hard drive activity LED * 2x Network activity LEDs * System Overheat LED / Fan fail LED / UID LED
Expansion Slots
PCI-Express	* 2 (x16) PCI-E 3.0 slots (GPU/MIC optional) * 1 (x8) PCI-E 3.0 slot for I.B. card * UIO AOC Compatibility Matrix
Drive Bays
Hot-swap	* 6x 2.5" Hot-swap drive bays
System Cooling
Fans	* 8x counter-rotating fans with optimal fan speed control
Power Supply
1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage	1200W: 100-140 V, 14.7-10.5A, 50-60 Hz 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5V standby	6 Amp
+12V	100 Amp/115 Vac 117 Amp/230 Vac
With Distributor	+5V: 30Amp +3.3V: 25Amp -12V: 0.6Amp
Certification	80PLUS Platinum
PC Health Monitoring
CPU	* Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. * CPU Core 5-Phase-switching voltage regulator
FAN	* Total of eight 4-pin PWM fans * 8x fans with tachometer monitoring * Status monitor for speed control * Status monitor for on/off control * Low noise fan speed control
Temperature	* Monitoring for CPU and chassis environment * CPU thermal trip support * Thermal Control for 8x Fan Connectors * PSU I2C temperature sensing logic * Thermal Monitor 2 (TM2) support * PECI
LED	* Power Fail / Overheat LED * Suspend-state Indicator LED * UID LED
Other Features	* SDDC Support
Operating Environment / Compliance
RoHS	* RoHS Compliant
Environmental Spec.	* Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing)