1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
2. Up to 512GB ECC DDR3, up to 1866MHz; 8x DIMM sockets
3. 3x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards),
    1x PCI-E 3.0 x8 (in x16) low-profile slot
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Intel® i350 Dual-Port GbE Controller
6. 4x Hot-swap 2.5" SATA Drive Bays
7. 1800W Redundant Power Supplies Platinum Level (94%+)
8. 10x Counter rotating fans w/ optimal fan speed control
9. Smart server management tools
 

Integrated Board X9DRG-HF

Available Colors: Black
* Drivers & Utilities  * BIOS  * IPMI  * Tested MEM  * Tested HDD  * Manuals 
* OS Certification Matrix  *  Compatible GPU List

 

Product SKUs
SYS-1027GR-TRF	* SuperServer 1027GR-TRF (Black)
Motherboard
Super X9DRG-HF
Processor/Cache
CPU	*Dual Socket R (LGA 2011) * Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP)
Note	† BIOS version 3.0 or above is required
Cache	* Up to 30MB
System Bus	* QPI up to 8 GT/s
GPU/Xeon Phi Support	* M2090, up to 130W CPU at 30°C * M2075, up to 130W CPU at 35°C * K10/K20/K20X (Kepler), up to 130W CPU at 30°C * Xeon Phi, up to 130W CPU at 30°C
System Memory
Memory Capacity	* 8x 240-pin DDR3 DIMM sockets * Up to 512GB DDR3 ECC LRDIMM * Supports up to 256 GB DDR3 ECC Registered memory (RDIMM) * Supports up to 48 GB DDR3 ECC and non-ECC UDIMM
Memory Type	* 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	* 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	* 1.5 V, 1.35 V
Error Detection	* Corrects single-bit errors * Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset	* Intel® C602 Chipset
SATA	* SATA 2.0 3Gbps with RAID 0, 1, 5, 10 * SATA 3.0 6Gbps with RAID 0, 1
IPMI	* Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Winbond® WPCM450 BMC
Network Controllers	* Intel® i350 Dual Port Gigabit Ethernet * Virtual Machine Device Queues reduce I/O overhead * Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output * 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	* Matrox G200eW
Input / Output
SATA	* 2 SATA 3.0 ports (6Gbps) * 2 SATA 2.0 ports (3Gbps)
LAN	* 2x RJ45 Gigabit Ethernet LAN ports * 1x RJ45 Dedicated IPMI LAN port
USB	* 2 USB 2.0 ports
VGA	* 1 VGA Connector
Keyboard/Mouse	* 1 PS/2 Keyboard/Mouse port
Serial Port / Header	* 1 Serial header
Chassis
Form Factor	1U Rackmount
Model	CSE-118GQ-R1800B
Dimensions
Width	17.2" (437mm)
Height	1.7" (43mm)
Depth	31" (787mm)
Gross Weight	48 lbs (21.8 kg)
Available Colors	Black
Front Panel
Buttons	* Power On/Off button * System Reset button * UID button
LEDs	* Power LED * Hard drive activity LED * 2x Network activity LEDs * System Overheat LED / Fan fail LED / * UID LED
Expansion Slots
PCI-E	* 3x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards) * 1x PCI-E 3.0 x8 (in x16) low-profile slot * AOC Compatibility Matrix
Drive Bays
Hot-swap	* 4x 2.5" Hot-swap drive bays
Backplane
1x 1U SAS2 / SATA backplane
System Cooling
Fans	* 10x counter-rotating fans with optimal fan speed control
Power Supply
1800W (1+1) Redundant 1800W power supply with PMBus
AC Input	1000W Output @ 100-120V, 12-10A, 50-60Hz 1200W Output @ 120-140V, 12-10A, 50-60Hz 1800W Output @ 200-240V, 10-8.5A, 50-60Hz
DC Output	1000W: +12V/84A; +5Vsb/4A 1200W: +12V/100A; +5Vsb/4A 1800W: +12V/150A; +5Vsb/4A
Certification	80PLUS Platinum Certified
System BIOS
BIOS Type	* 128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	* Plug and Play (PnP) * APM 1.2 * DMI 2.3 * PCI 2.2 * ACPI 1.0 / 2.0 * USB Keyboard support * Hardware BIOS Virus protection * SMBIOS 2.3 * UEFI * RTC (Real Time Clock) Wakeup
PC Health Monitoring
CPU	* Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. * CPU Core 6-Phase-switching voltage regulator
FAN	* Total of ten 4-pin PWM fans * 10x fans with tachometer monitoring * Status monitor for speed control * Status monitor for on/off control * Low noise fan speed control
Temperature	* Monitoring for CPU and chassis environment * CPU thermal trip support * Thermal Control for 10x Fan Connectors * PSU I2C temperature sensing logic * Thermal Monitor 2 (TM2) support * PECI
LED	* Power Fail / Overheat LED * Suspend-state Indicator LED * UID LED
Other Features	* SDDC Support
Operating Environment / Compliance
RoHS	* RoHS Compliant
Environmental Spec.	* Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing)