MÁY CHỦ SERVER SUPERSERVER 1028U-TNR4T+ E5-2600 v3 family

MÁY CHỦ SERVER SUPERSERVER 1028U-TNR4T+ E5-2600 v3 family

Key Features
1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
2. Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM sockets
3. 2x PCI-E 3.0 x16 slots (FH, 10.5" L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
4. 4x 10GBase-T ports
5. 10x Hot-swap 2.5" Drive Bays: Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports; Optional 8x SAS3 ports via AOC
6. 4x heavy duty fans w/ optimal fan speed control
7. 750W Redundant Power Supplies Platinum Level (94%+)

 

Integrated Board X10DRU-i+

Product SKUs
SYS-1028U-TNR4T+	* SuperServer 1028U-TNR4T+ (Black)
Motherboard
Super X10DRU-i+
Processor/Cache
CPU	* Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP **) * Dual Socket R3 (LGA 2011)
Cores / Cache	* Up to 18 Cores / Up to 45MB Cache
System Bus	* QPI up to 9.6 GT/s
Note	** Please contact your Supermicro sales representative for additional details.
System Memory
Memory Capacity	* 24x 288-pin DDR4 DIMM sockets * Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
Memory Type	* 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	* RDIMM: 32GB, 16GB, 8GB, 4GB * LRDIMM: 64GB, 32GB
Memory Voltage	* 1.2 V
Error Detection	* Corrects single-bit errors
On-Board Devices
Chipset	* Intel® C612 Express chipset
SATA	* SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	* Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * ASPEED AST2400 BMC
Network Connectivity	* 4x 10GBase-T ports
Graphics	* ASPEED AST2400 BMC
Input / Output
SATA	* 10x SATA3 (6Gbps) ports
SAS	* 8x SAS3 ports support via optional Add-on Card
NVMe	* 2x NVMe ports
LAN	* 4x RJ45 10GBase-T ports * 1x RJ45 Dedicated IPMI LAN port
USB	* 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video	* 1x VGA Connector
Serial Port	* 1x Serial header
System BIOS
BIOS Type	* 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	* Plug and Play (PnP) * APM 1.2 * PCI 2.3 * ACPI 1.0 / 2.0 / 3.0 / 4.0 * USB Keyboard support * SMBIOS 2.7.1 * UEFI 2.3.1
Management
Software	* SuperDoctor® 5 * Intel® Node Manager 3.0 * Watch Dog * NMI * SMCBU and SMM * Optional IPMI 1.5 / 2.0
Power Configurations	* ACPI Power Management * Power-on mode for AC power recovery
Chassis
Form Factor	* 1U Rackmount
Model	* CSE-119UAC-R750
Dimensions and Weight
Height	1.7" (43mm)
Width	1.7" (43mm)
Depth	27.8" (707mm)
Gross Weight	48 lbs (21.8 kg)
Available Color	Black
Front Panel
Buttons	* Power On/Off button * System Reset button
LEDs	* Power LED * Hard drive activity LED * 2x Network activity LEDs * System Overheat LED / Fan fail LED / UID LED
Expansion Slots
PCI-Express	* 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L) * 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap	* 10x 2.5" Hot-swap drive bays * Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports * Optional 8x SAS3 ports via AOC
System Cooling
Fans	* 4x heavy duty fans with optimal fan speed control * 4x additional fans optional
Air Shroud	* 1x Air Shroud
Power Supply
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output
AC Input	100-127Vac, 50-60Hz 200-240Vac, 50-60Hz
+12V	Max: 62.5A & Min: 0A (100Vac-127Vac) Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB	Max: 2.1A Min: 0A
Certification	Platinum Level      [ Test Report ]
PC Health Monitoring
Voltage	* Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. * 5+1 Phase-switching voltage regulator
FAN	* 8x 4-pin fan headers * Status monitor for speed control * Pulse Width Modulated (PWM) fan connectors
Temperature	* Support to monitor Supermicro AOC temperatures from IPMI or SD 5 * Monitoring for CPU and chassis environment * CPU thermal trip support * Thermal Control for 8x Fan Connectors * Thermal Monitor 2 (TM2) support * PECI
LED	* Memory DIMM ECC error LEDs * CPU / System Overheat LED * Suspend static indicator LED * UID/Remote UID
Other Features	* 4x 8-pin GPU power connectors * Chassis intrusion detection * Chassis intrusion header * SDDC Support * RoHS
Operating Environment / Compliance
RoHS	* RoHS Compliant
Environmental Spec.	* Operating Temperature: 5°C to 40°C (41°F to 104°F) * Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing)